www.samtec.com no. positions per row wire length ??xx.xx? = wire length in inches (95,3mm) 03.75" minimum. type micd = mates with mis/mit sqcd = mates with qts/qss 6qcd = mates with qms/qfs ?019, ?038, ?057, ?076 (micd) ?025, ?050, ?075, ?100 (sqcd) ?026, ?052, ?078, ?104 (6qcd) micd mates with: mis, mit sqcd mates with: qts, qss 6qcd mates with: qms, qfs specifications for complete speci cations see www.samtec.com?micd, see www.samtec.com?sqcd or see www.samtec.com?6qcd cable: 38 awg eye speed coax micro ribbon signal routing: 50 single-ended overall length: (152mm) 6" to (1m) 40" standard cable flexing life: >40,000 cycles cable bending radius: <2,5mm plating: au over 50? (1,27?) ni current rating: 300 millamp max propagation delay: 4.5 nsec/meter operating temp range: -25? to +105? rohs compliant: ye s 0,635 mm high speed cable micd, sqcd, 6qcd series ? wire length ?1,27) .050 oal = wire length + l applications processing conditions will affect mated height. (9,28) .365 (16,56) .652 (12,70) .500 (micd, sqcd only) end no. 1 (-str shown) end no. 2 (-ttr shown) end to end (27,98) 1.101 (24,15) .951 (23,51) .926 (20,32) .800 (19,69) .775 (19,05) .750 (24,13) .950 (21,21) .835 (20,48) .806 (18,29) .720 (17,55) .691 (16,81) .662 (28,47) 1.121 (27,09) 1.067 (25,70) 1.012 n/a n/a n/a surface mount to surface mount surface mount to edge mount (terminal) surface mount to edge mount (socket) edge mount (terminal) to edge mount (terminal) edge mount (terminal) to edge mount (socket) edge mount (socket) to edge mount (socket) micd sqcd 6qcd l note: cable lengths longer than 40.00" (1 meter) are not supported with s.i. test data. note: verify part number and correct wiring scheme with samtec s interactive cable builder at www.samtec.com/cable_ builder/pitch.asp note: this series is non-standard, non-returnable. cable length rated @ -3db insertion loss micd 6" (152,4mm) 1.64 ghz / 3.28 gbps 12" (304,8mm) 1.22 ghz / 2.44 gbps 19.68" (0,5m) 760 mhz / 1.52 gbps 39.37" (1m) 458 mhz / 916 mbps f-209 supplement micd?038?06.00?str?stl?4 micd?019?06.00?ttl?stl?3 38 awg eye speed? micro ribbon coax cable increased insertion depth surface mount or edge mount socket or terminal ?
www.samtec.com end no. 1 end no. 2 specify end assemblies from chart wiring option ?1 = pin 1 to pin 1 ?2 = pin 1 to pin 2 ?3 = pin 1 to second last pin ?4 = pin 1 to last pin screw down end option leave blank for no screw option ?f = end no. 1 ?s = end no. 2 ?b = both ends end ttr ttl tbr tbl str stl sbr sbl surface mount t erminal, t op, notch r ight t erminal, t op, notch l eft t erminal, b ottom, notch r ight t erminal, b ottom, notch l eft s ocket, t op notch r ight, s ocket, t op, notch l eft s ocket, b ottom, notch r ight s ocket, b ottom, notch l eft teu ted seu sed edge mount t erminal, e dge, notch u p t erminal, e dge, notch d own s ocket, e dge, notch u p (n/a w/ 6qcd) s ocket, e dge, notch d own (n/a w/ 6qcd) end #4-40 threads (3,28) .129 dia edge mount (?ex) screw down options surface mount (?tx & ?bx) screw down options screw mount applications (?f, ?s, ?b) sqcd?025?06.00?ted?str?1 6qcd?026?06.00?teu?str?1-f 6qcd?026?06.00?str?ttl?3?f choice of screw mount end options choice of socket or terminal choice of screw mount end options kf2-440-et kfe-440-4et
|
